Showing 1–16 of 26 results

Mazda MX5 MK1 MK2 Polished Stainless Steel Boot RackOut Of Stock

Boot Rack – Polished Stainless Steel MK1 & MK2 “New”

£141.63 ex VAT £169.96 inc. VAT

A brand new polished stainless steel boot rack for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Secures to the boot lid with front and rear clamps; fixings included

High quality polished stainless steel

NO drilling required

Fully removable

Load carrying capacity is 35 kg

Bumper Reflectors Clear – Full Car Set MK1 / MK2 “New”

£34.96 ex VAT £41.95 inc. VAT

A full car set of brand new clear bumper reflectors for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

These reflectors can either be connected for illumination or left disconnected

Consists of :-

  • 2 x N/S (LH / Passenger) reflectors
  • 2 x O/S (RH / Drivers) reflectors
  • 4 x bulb holders
  • 4 x bulbs and fixings

Easy fitment

Replacements for the standard orange and red reflectors

Mazda MX5 MK1 MK2 Clear Bumper Reflectors Pair

Bumper Reflectors Clear – Pair MK1 / MK2 “New”

£20.79 ex VAT £24.95 inc. VAT

A pair of brand new clear bumper reflectors for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

These reflectors can either be connected for illumination or left disconnected

Consists of :-

  • 1 x N/S (LH / Passenger) reflector
  • 1 x O/S (RH / Drivers)
  • 2 x bulb holders
  • 2 x bulbs and fixings

Easy fitment

Replacements for the standard orange and red reflectors

Mazda MX5 MK1 MK2 Chrome M style Roll Bar CockpitOut Of Stock

Chrome Roll Bar M Style – MK1 / MK2 (Used)

£33.33 ex VAT £40.00 inc. VAT

A used chrome M style roll bar suitable for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Side mountable

This is a used item and there is slight corrosion and markings – see the photos.

Mazda MX5 MK2.5 Front Bumper Grille Tow Eye Cut OutsOut Of Stock

Grille – Front Bumper with Tow Eye Cut Outs – MK2.5 “New”

£21.63 ex VAT £25.96 inc. VAT

A brand new stainless steel front bumper grille with the tow eye cut outs for the MK2.5 (facelift version) 1.6 and 1.8 models 2001 to 2005

These will also fit the MK2 models 1998 to 2000 but there will be a slight gap at the edges.

Easy fitment and no fixings required … its just a case of lining up the cut-outs of the grille where the bumper mount bolts are located, loosen, slide into place and tighten.  Instructions are also included or we are available to talk you through the process.

 

Jass Performance Black Stainless Steel Mesh Grille Mazda MX5 MK2

Grille – Jass Performance Black Stainless Steel Mesh MK2 1998>00 “New”

£24.96 ex VAT £29.95 inc. VAT

A brand new genuine Jass performance front bumper black stainless steel mesh grille for the MK2 1.6 and 1.8 models 1998 to 2000

  • Lightweight
  • Rust resistant
  • Being stainless steel (and not aluminium), provides very effective resistance to even larger stone hits, protects the radiators and intercooler
  • Open mesh pattern allows nearly unrestricted air flow
  • Good decorative effect, preventing sight over engine internals in both versions
  • Matches mesh pattern of the Jass Performance TSI options

Easy fitment and no fixings required

This grille is for the MK2 model and will not fit the MK2.5 facelift version, 2001 to 2005

 

 

Jass Performance Stainless Steel Mesh Grille Mazda MX5 MK2

Grille – Jass Performance Stainless Steel Mesh Grille MK2 1998>00 “New”

£24.96 ex VAT £29.95 inc. VAT

A brand new genuine Jass performance front bumper stainless steel mesh grille for the MK2 1.6 and 1.8 models 1998 to 2000

  • Lightweight
  • Rust resistant
  • Being stainless steel (and not aluminium), provides very effective resistance to even larger stone hits, protects the radiators and intercooler
  • Open mesh pattern allows nearly unrestricted air flow
  • Good decorative effect, preventing sight over engine internals in both versions
  • Matches mesh pattern of the Jass Performance TSI options

Easy fitment and no fixings required

This grille is for the MK2 model and will not fit the MK2.5 facelift version, 2001 to 2005

 

Jass Performance Classic Polished Gear Knob Mazda MX5Out Of Stock

Jass Performance – Classic Style Gear Knob Polished MK1, MK2 & MK3 “New”

£26.63 ex VAT £31.96 inc. VAT

A brand new genuine Jass performance classic style polished gear knob for the MK1, MK2 and MK3, 1.6 1.8 and 2.0 models 1989 to 2015

Solid aluminium gear knob, specially designed for the Mazda MX5 for functional integrity and perfect design fit

The classic style MX5 knob extends over the standard one by an inch that gives more precise shift feeling. With a 50mm diameter it is and feels heavy and solid in the hand. It will fully integrate, covering the leather gaiter just at the correct height

Being tailored for MX5s, the installation is easy and straight forward

Easy fitment – just unscrew the original gear knob and replace with this classic gear knob

Jass Performance Instrument Cluster Black Brushed Mazda MX5 MK2Out Of Stock

Jass Performance – Engraved Instrument Cluster Black Brushed MK2 “New”

£29.13 ex VAT £34.96 inc. VAT

A brand new Jass performance engraved black brushed stainless steel instrument cluster bezel for the MX5 MK2 1.6 and 1.8 models 1998 to 2005

Only suitable for the RHD models but LHD versions available on request

Comes with engraved stainless plates for the Rev and Speed dials to bring the most out of the stock classic gauge faces scheme

Jass Performance Handbrake Handle Polished Mazda MX5 MK1 MK2

Jass Performance – Handbrake Handle Polished MK1 & MK2 “New”

£22.46 ex VAT £26.95 inc. VAT

A brand new genuine Jass performance polished handbrake handle for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Ergonomically designed aluminium handbrake handle, specially designed for Mazda MX5 for functional integrity and perfect design fit

The handbrake handles finish will fully match the brushed interior and Jass aluminium gear knobs and works perfectly with the Jass Performance drift buttons available to purchase separately

Easy and straight forward installation

 

Jass Performance Hard Top Brackets Front Mazda MX5 MK1 MK2Out Of Stock

Jass Performance – Hard Top Front Brackets MK1 & MK2 “New”

£24.96 ex VAT £29.95 inc. VAT

Brand new genuine Jass performance hard top front brackets for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Front hard top brackets for securing your hard top

They offer tight fix of the hard top to the car body, reducing body twist and gives you a coupe-like feeling – no more chattering, wind noises and cracks in the windshield

Laser cut from 4 mm steel, pre-bend and powder coated they will direct fit with or without interior trim

No cutting or adapting needed!

Strong metal to metal connection between the hardtop and the cars chassis and does not lie on plastic trims!

Designed to hold the interior trims together, similar to the Mazda brackets

This is the front set only –  for a full set you will require the side brackets as well

There is no fixings but they are available if required – just reuse the exisiting bolts

Quick installation notes:

As all hardtops at this age vary in shape, the Jass Performance brackets will settle to the hardtop after first installation. It is recommended to follow the installation procedure for best results:
– install the brackets on the hardtop first (3 bolts) loose
– center the brackets at the frames with the 2 larger bolts
– tighten the 3 hardtop bolts
– push the hardtop in position using one of these techniques:
a) second person pushes the hardtop to the front for the front ones and down for the rear ones
b) the C-clamp method (see the picture attached)
c) using the OEM clamp on the one front side, while tightening the other. This method needs definite reinstallation after the brackets are settled however
– tightly fix the one large bolt, then the next and back to the first, until they are both tight
– do this for all brackets
They will settle into this position quite fast (20-30km). If wind noise is present – reinstall again the front ones at their new front most position (the rears should be removed to allow adjustment further to the front)
Very important notes to exclude further possible noises before the hardtop brackets installation:
– before the hardtop installation, make sure, the legs, centering over the frankenstein bolts have their full rubber insulation underneath. Damaged or missing insulation causes knocking noises at the rear
– before the installation, please make sure the rubber hardtop seal at the rear is greased with some silicon to prevent rubbing noises to the chassis

Jass Performance Hard Top Brackets Side Mazda MX5 MK1 MK2Out Of Stock

Jass Performance – Hard Top Side/Rear Brackets MK1 & MK2 “New”

£24.96 ex VAT £29.95 inc. VAT

Brand new genuine Jass performance hard top side / rear brackets for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Side / rear hard top brackets for securing your hard top

They offer tight fix of the hard top to the car body, reducing body twist and gives you a coupe-like feeling – no more chattering, wind noises and cracks in the windshield

Laser cut from 4 mm steel, pre-bend and powder coated they will direct fit with or without interior trim

No cutting or adapting needed!

Strong metal to metal connection between the hardtop and the cars chassis and does not lie on plastic trims!

Designed to hold the interior trims together, similar to the Mazda brackets

This is the side set only – for a full set you will require the front brackets as well

There is no fixings but they are available if required – just reuse the exisiting bolts

Quick installation notes:

As all hardtops at this age vary in shape, the Jass Performance brackets will settle to the hardtop after first installation. It is recommended to follow the installation procedure for best result:
– install the brackets on the hardtop first (3 bolts) loose
– center the brackets at the frames with the 2 larger bolts
– tighten the 3 hardtop bolts
– push the hardtop in position using one of these techniques:
a) second person pushes the hardtop to the front for the front ones and down for the rear ones
b) the C-clamp method (see the picture attached)
c) using the OEM clamp on the one front side, while tightening the other. This method needs definite reinstallation after the brackets are settled however
– tightly fix the one large bolt, then the next and back to the first, until they are both tight
– do this for all brackets
They will settle into this position quite fast (20-30km). If wind noise is present – reinstall again the front ones at their new front most position (the rears should be removed to allow adjustment further to the front)
Very important notes to exclude further possible noises before the hardtop brackets installation:
– before the hardtop installation, make sure, the legs, centering over the frankenstein bolts have their full rubber insulation underneath. Damaged or missing insulation causes knocking noises at the rear
– before the installation, please make sure the rubber hardtop seal at the rear is greased with some silicon to prevent rubbing noises to the chassis

Mazda MX5 MK1 MK2 Jass Performance Offset Number Plate BlackOut Of Stock

Jass Performance – Offset Number Plate Bracket Black MK1 & MK2 “New”

£24.13 ex VAT £28.96 inc. VAT

A brand new Jass performance black aluminum offset number plate bracket for the MX5 MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Comes complete with fixings

Easy fitment

 

  • License plate offset bracket made from aluminum, powdercoated in black
  • Lightweight weighting only 200 grams, but strong enough to be used in autocrossing, secured with two bolts (market common is one) to prevent twisting
  • Variable number plate bolt distance 130-190mm

 

Mazda MX5 MK1 MK2 Jass Performance Offset Number Plate PolishedOut Of Stock

Jass Performance – Offset Number Plate Bracket Polished MK1 & MK2 “New”

£20.79 ex VAT £24.95 inc. VAT

A brand new Jass performance stainless steel polished offset number plate bracket for the MX5 MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Comes complete with fixings

Easy fitment

  • Mirror polish stainless steel finish
  • Lightweight weight – only 220 grams
  • Secured with two bolts to prevent twisting
  • Variable number plate bolt distance 130-190mm