Showing 961–976 of 1718 results

Jass Performance Classic Polished Gear Knob Mazda MX5Out Of Stock

Jass Performance – Classic Style Gear Knob Polished MK1, MK2 & MK3 “New”

£26.63 ex VAT £31.96 inc. VAT Join Waitlist

A brand new genuine Jass performance classic style polished gear knob for the MK1, MK2 and MK3, 1.6 1.8 and 2.0 models 1989 to 2015

Solid aluminium gear knob, specially designed for the Mazda MX5 for functional integrity and perfect design fit

The classic style MX5 knob extends over the standard one by an inch that gives more precise shift feeling. With a 50mm diameter it is and feels heavy and solid in the hand. It will fully integrate, covering the leather gaiter just at the correct height

Being tailored for MX5s, the installation is easy and straight forward

Easy fitment – just unscrew the original gear knob and replace with this classic gear knob

Jass Performance Handbrake Handle Polished Mazda MX5 MK1 MK2

Jass Performance – Handbrake Handle Polished MK1 & MK2 “New”

£22.46 ex VAT £26.95 inc. VAT

A brand new genuine Jass performance polished handbrake handle for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Ergonomically designed aluminium handbrake handle, specially designed for Mazda MX5 for functional integrity and perfect design fit

The handbrake handles finish will fully match the brushed interior and Jass aluminium gear knobs and works perfectly with the Jass Performance drift buttons available to purchase separately

Easy and straight forward installation

 

Jass Performance Hard Top Brackets Front Mazda MX5 MK1 MK2Out Of Stock

Jass Performance – Hard Top Front Brackets MK1 & MK2 “New”

£24.96 ex VAT £29.95 inc. VAT Join Waitlist

Brand new genuine Jass performance hard top front brackets for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Front hard top brackets for securing your hard top

They offer tight fix of the hard top to the car body, reducing body twist and gives you a coupe-like feeling – no more chattering, wind noises and cracks in the windshield

Laser cut from 4 mm steel, pre-bend and powder coated they will direct fit with or without interior trim

No cutting or adapting needed!

Strong metal to metal connection between the hardtop and the cars chassis and does not lie on plastic trims!

Designed to hold the interior trims together, similar to the Mazda brackets

This is the front set only –  for a full set you will require the side brackets as well

There is no fixings but they are available if required – just reuse the exisiting bolts

Quick installation notes:

As all hardtops at this age vary in shape, the Jass Performance brackets will settle to the hardtop after first installation. It is recommended to follow the installation procedure for best results:
– install the brackets on the hardtop first (3 bolts) loose
– center the brackets at the frames with the 2 larger bolts
– tighten the 3 hardtop bolts
– push the hardtop in position using one of these techniques:
a) second person pushes the hardtop to the front for the front ones and down for the rear ones
b) the C-clamp method (see the picture attached)
c) using the OEM clamp on the one front side, while tightening the other. This method needs definite reinstallation after the brackets are settled however
– tightly fix the one large bolt, then the next and back to the first, until they are both tight
– do this for all brackets
They will settle into this position quite fast (20-30km). If wind noise is present – reinstall again the front ones at their new front most position (the rears should be removed to allow adjustment further to the front)
Very important notes to exclude further possible noises before the hardtop brackets installation:
– before the hardtop installation, make sure, the legs, centering over the frankenstein bolts have their full rubber insulation underneath. Damaged or missing insulation causes knocking noises at the rear
– before the installation, please make sure the rubber hardtop seal at the rear is greased with some silicon to prevent rubbing noises to the chassis

Jass Performance Hard Top Brackets Side Mazda MX5 MK1 MK2Out Of Stock

Jass Performance – Hard Top Side/Rear Brackets MK1 & MK2 “New”

£24.96 ex VAT £29.95 inc. VAT Join Waitlist

Brand new genuine Jass performance hard top side / rear brackets for the MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Side / rear hard top brackets for securing your hard top

They offer tight fix of the hard top to the car body, reducing body twist and gives you a coupe-like feeling – no more chattering, wind noises and cracks in the windshield

Laser cut from 4 mm steel, pre-bend and powder coated they will direct fit with or without interior trim

No cutting or adapting needed!

Strong metal to metal connection between the hardtop and the cars chassis and does not lie on plastic trims!

Designed to hold the interior trims together, similar to the Mazda brackets

This is the side set only – for a full set you will require the front brackets as well

There is no fixings but they are available if required – just reuse the exisiting bolts

Quick installation notes:

As all hardtops at this age vary in shape, the Jass Performance brackets will settle to the hardtop after first installation. It is recommended to follow the installation procedure for best result:
– install the brackets on the hardtop first (3 bolts) loose
– center the brackets at the frames with the 2 larger bolts
– tighten the 3 hardtop bolts
– push the hardtop in position using one of these techniques:
a) second person pushes the hardtop to the front for the front ones and down for the rear ones
b) the C-clamp method (see the picture attached)
c) using the OEM clamp on the one front side, while tightening the other. This method needs definite reinstallation after the brackets are settled however
– tightly fix the one large bolt, then the next and back to the first, until they are both tight
– do this for all brackets
They will settle into this position quite fast (20-30km). If wind noise is present – reinstall again the front ones at their new front most position (the rears should be removed to allow adjustment further to the front)
Very important notes to exclude further possible noises before the hardtop brackets installation:
– before the hardtop installation, make sure, the legs, centering over the frankenstein bolts have their full rubber insulation underneath. Damaged or missing insulation causes knocking noises at the rear
– before the installation, please make sure the rubber hardtop seal at the rear is greased with some silicon to prevent rubbing noises to the chassis

Mazda MX5 MK1 MK2 Jass Performance Offset Number Plate BlackOut Of Stock

Jass Performance – Offset Number Plate Bracket Black MK1 & MK2 “New”

£24.13 ex VAT £28.96 inc. VAT Join Waitlist

A brand new Jass performance black aluminum offset number plate bracket for the MX5 MK1 and MK2 1.6 and 1.8 models 1989 to 2005

Comes complete with fixings

Easy fitment

 

  • License plate offset bracket made from aluminum, powdercoated in black
  • Lightweight weighting only 200 grams, but strong enough to be used in autocrossing, secured with two bolts (market common is one) to prevent twisting
  • Variable number plate bolt distance 130-190mm

 

Jass Performance Type R Chrome Gear Knob Mazda MX5 MK1 MK2 MK3

Jass Performance – Type R Style Gear Knob Chrome MK1, MK2 & MK3 “New”

£24.96 ex VAT £29.95 inc. VAT

A brand new genuine Jass performance type R style chrome gear knob for the MK1, MK2 and MK3, 1.6 1.8 and 2.0 models 1989 to 2015

Solid aluminium gear knob, specially designed for the Mazda MX5 for functional integrity and perfect design fit

The Type R style MX5 knob offers outstanding ergonomic design and brings to shine the the precise feel of the legendary short shifting MX5 gearbox

The knob is made to be the shortest possible for the MX5 and extends just a millimeter above the threaded shift lever

Being tailored for MX5s, the installation is easy and straight forward

Easy fitment – just unscrew the original gear knob and replace with this type R gear knob

Jass Performance Type R Red Gear Knob Mazda MX5 MK1 MK2 MK3Out Of Stock

Jass Performance – Type R Style Gear Knob Red MK1, MK2 & MK3 “New”

£24.96 ex VAT £29.95 inc. VAT Join Waitlist

A brand new genuine Jass performance type R style red gear knob for the MK1, MK2 and MK3, 1.6 1.8 and 2.0 models 1989 to 2015

Solid aluminium gear knob, specially designed for the Mazda MX5 for functional integrity and perfect design fit

The Type R style MX5 knob offers outstanding ergonomic design and brings to shine the the precise feel of the legendary short shifting MX5 gearbox

The knob is made to be the shortest possible for the MX5 and extends just a millimeter above the threaded shift lever

Being tailored for MX5s, the installation is easy and straight forward

Easy fitment – just unscrew the original gear knob and replace with this type r gear knob

Laguna Blue / Perky Blue (6W) Spray Paint – 400ml MK1 “New”

£16.63 ex VAT £19.96 inc. VAT

A 400ml can of Laguna Blue / Perky Blue metallic spray paint for the MK1 1.6 and 1.8 models 1989 to 1998

Paint Codes – 6W

Paint Colours – Laguna Blue or Perky Blue

Perfectly matched to the original Mazda colour code of your choice – we use these within our service centre and found they are the best matched paint we have used!!

Note: Due to transportation restrictions of dangerous goods, we are unable to send these outside of the UK

“The colour shown within this listing is for indicative purposes and you should always refer to the original paint code of your MX5. If you are unsure feel free to contact us and we will be happy to help “

Laser / Starry Blue Spray Paint – 400ml MK2 & MK3 “New”

£16.63 ex VAT £19.96 inc. VAT

A 400ml can of Laser / Starry Blue spray paint for the MK2 and MK3 1.6, 1.8 and 2.0 models 1998 to 2015

Paint Codes – 24A

Paint Colours – Laser Blue or Starry Blue

Perfectly matched to the original Mazda colour code of your choice – we use these within our service centre and found they are the best matched paint we have used!!

Note: Due to transportation restrictions of dangerous goods, we are unable to send these outside of the UK

“The colour shown within this listing is for indicative purposes and you should always refer to the original paint code of your MX5. If you are unsure feel free to contact us and we will be happy to help “